Audi A4/S4 (8K) & Audi A5/S5 (8T) B8 VCDS Info. Updated 24 Jan. 2012. These instructions apply to Audi B8 platform vehicles including the Audi A4/S4 (8K) and Audi A5/S5 (8T). Ross-Tech is not responsible for any damage or problems that may result from following these instructions. They are to be used at your own risk.
Check the spark plug gap. Next, insert the new ignition coils into the engine wells until they snap into place. Plug the electrical harness plugs into the ignition coils. Tighten down the Torx screw to the harness. Then reconnect the eight bottom plugs of the harness. Replace the engine cover and reconnect the battery.
Pull the bulb socket out of the housing. To disconnect the bulb from the socket, you'll need to push in a tab on the socket and pull the bulb from the socket. Repeat this for the other side. Figure 1. Remove the lower bolts and pull back the wheel well lining. Figure 2. Remove the fog light bulb.
Verdict 4th Gen Audi A4 What Owners Say Owners love the understated exterior styling and inviting interior. Passengers appreciate the added interior space of the fourth-generation Audi A4.
I rebuilt the top end (head & valves) and, of course, new chain guides / chain only to find the piston rings in three of the cylinders were showing higher than expected leakage resulting in lower compression. At this point I considered pulling the pistons and either fitting new rings or new pistons / rings.
. 375 255 117 398 469 106 125 76
what is an audi a4 b8
